Earrings with pendants

Making your own earrings is super easy! Mix & match your favourite pendants and make earrings that suit you.

To make the earrings, you need various products. These can be found below each explanation. For each earring you will need a pair of flat-nose pliers.

Earrings with bohemian pendant and peridot charm:
Open the eye of the peridot charm and hang it on the inner eye of the bohemian diamond charm. Close the eyelet and hang an earring hook on the outer eyelet.

Materials used:
Stainless steel earring hook silver 20x21mm
2x Stainless steel peridot charm silver 18x5mm
2x Stainless steel bohemian charm silver diamond 40x26mm

Earrings with butterfly:
Open the eye of the earring hook and hook the butterfly charm to it. Close the eyelet again.

Materials used:
Stainless steel earring hook silver 20x21mm
2x Charm butterfly black white 13.5x20mm

Earrings with porcelain flower beads:
Carefully bend the earring hook slightly flatter. Use the flattening pliers for this. The hook only needs to be flattened a tiny bit so that the beads can be threaded onto it. Now thread a spacer bead first and then a porcelain bead. Repeat until you have strung 3 porcelain beads and 4 spacer beads. Bend the hook back into a corner and you're done!

Materials used:
Stainless steel hoop earring silver 30x25x0.8mm
Metal spacer beads silver 4mm
6x Porcelain bead with flower blue 10mm

Earrings with hearts:
Attach a 4mm jumpring to the ring of the charm. There are now 2 rings hanging from it. Open the earring and hang the charm from this.

Materials used:
Stainless Steel Hoop Huggies Earrings Silver 11mm
2x Luxe brass charm silver with zirconia 13x11mm heart
Stainless steel jumprings 4mm silver

Earrings with stainless steel charm:
Open the hook at the bottom of the earring. Attach the charm to this and bend the eyelet closed again.

Materials used:
Stainless steel hoop earrings silver 12x15mm
2x Charm coin sun with zirconia silver 21x18x2mm

Earrings with porcelain bead:
Take a head pin and cut off the head. Turn an eye with the round pliers and thread the porcelain bead. Bend the other end of the head pin and cut it off. Leave about 1cm in between. Turn an eye here too. Now attach the diamond pendant on one side and the stud on the other. Watch the video below on how to make the best eyelets.

Materials used:
Stainless steel studs earring 15x4mm
Headpins silver colour 5cm
2x Porcelain beads brown blue 10~11x6mm
2x Rhombus charm silver 8.7x16.2mm
Round pliers

Earrings with drop pendant:
Open the earring and bend the hook very slightly flatter. Do this carefully so it doesn't break. Now thread the drop pendant onto the earring and bend the hook back.

Materials used:
Stainless steel hoop earring silver 15mm
2x Glass charm drop blue shine 16x9x5mm

Did you make something fun with our materials? Post your photo on instagram with #BeadsandBasics

Have fun making!